What's H3O? Is it an alkali? an acid? how is it made? what's it used for?



Answer:
Hydronium.
Follow the links
h30 and h4o are both forms of heavy water,used in industries..reaction with uranium,radium,plutonium etc. in nuclear reactors...
H3+ and H4+ are isotopes of hydrogen that combine with oxygen to give you h3o and h4o
H3O is hydronium. It is an acid and it is made by adding hydrogen to water, from what I remember from college chemistry (I could be wrong about that one). I believe it has a lot of medicinal uses. I would look it up and verify.
[H30]+ is an ion. It is formed during ionisation of water molecules.

H20 + H20 <--> [H30]+ + [OH]-

It's an acid according to Bronstend-Lowry theory, about bases and acids, because it can give of a [H]+ :

[H30] <--> H2O + H+
Hydronium
From Wikipedia, the free encyclopedia
Jump to: navigation, search
Hydronium


General
Systematic name Hydroxonium
Other names Hydronium Ion
Molecular formula H3O+
Molar mass 19.02 g/mol
Properties
Acid dissociation
constant pKa −1.7
Except where noted otherwise, data are given for
materials in their standard state (at 25 °C, 100 kPa)
Infobox disclaimer and references
In chemistry, hydronium is the common name for the cation H3O+ derived from protonation of water. It is the simplest type of an oxonium ion.

Contents [hide]
1 Nomenclature
2 Acids and acidity
3 Solvation
4 Solid hydronium salts
5 References



[edit] Nomenclature
According to IUPAC ion nomenclature, the hydronium ion should be referred to as oxonium. Hydroxonium may also be used unambiguously to identify it. A draft IUPAC proposal also recommends the use of oxonium and oxidanium in organic and inorganic chemistry contexts, respectively.

An oxonium ion is any ion with a trivalent oxygen cation. For example, a protonated hydroxyl group is an oxonium ion, but not a hydronium.


[edit] Acids and acidity
Hydronium is the cation that forms from water in the presence of hydrogen ions. These hydrons do not exist in a free state: they are extremely reactive and are solvated by water. An acid is generally the source of these hydrons; however, since water can behave as an acid, hydronium exists even in pure water. This special case of water reacting with water to produce hydronium (and hydroxide) ions is commonly known as the self-ionization of water. The resulting hydronium ions are few and short-lived. (Nevertheless, they form the basis for determining the pH of basic aqueous solutions, since the less there are of these autoionized hydroniums, the more there is base.)

Hydronium is very acidic: at 25°C, its pKa is -1.7. It is also the most acidic species that can exist in water (assuming sufficient water for dissolution): any stronger acid will ionize and protonate a water molecule to form hydronium. The acidity of hydronium is the implicit standard used to judge the strength of an acid in water: strong acids must be better proton donors than hydronium, otherwise a significant portion of acid will exist in a non-ionized state. Unlike the hydronium that results from water's autodissociation, these hydronium ions are long-lasting and concentrated, in proportion to the strength of the dissolved acid.

The pH of a solution is a measure of its proton concentration. Since these protons react with water to form hydronium, the acidity of an aqueous solution is determined by its hydronium concentration.


[edit] Solvation
Researchers have yet to fully characterize the solvation of hydronium ion in water, in part because many different meanings of solvation exist. A freezing point depression study determined that the mean hydration ion in cold water is approximately H3O+(H2O)6 [1]: on average, each hydronium ion is solvated by 6 water molecules which are unable to solvate other solute molecules.

Some hydration structures are quite large: the H3O+(H2O)20 magic ion number structure (called magic because of its increased stability with respect to hydration structures involving a comparable number of water molecules) might place the hydronium inside a dodecahedral cage [2]. However, more recent ab initio molecular dynamics simulations have shown that, on average, the hydrated proton resides on the surface of the H3O+(H2O)20 cluster[3]. Further, several disparate features of these simulations agree with their experimental counterparts suggesting an alternative interpretation of the experimental results.

Two other well-known structures are the Zundel cations and Eigen cations. The Eigen solvation structure has the hydronium ion at the center of an H9O4+ complex in which the hydronium is strongly hydrogen-bonded to 3 neighbouring water molecules [4]. In the Zundel H5O2+ complex the proton is shared equally by two water molecules [5]. Recent work indicates that both of these complexes represent ideal structures in a more general hydrogen bond network defect [6].

Isolation of the hydronium ion monomer in liquid phase was achieved in a nonaqueous, low nucleophilicity superacid solution (HF-SbF5SO2). The ion was characterized by high resolution O-17 nuclear magnetic resonance.[7].

In 2007, Markovitch & Agmon have calculated for the first time ever the enthalpies and free energies of the various hydrogen bonds around the hydronium cation in liquid protonated water[8] at room temperature and discussed the implementation for the proton hopping mechanism. Using molecular dynamics they were able to show that the hydrogen-bonds around the hydronium ion (formed with the three water ligands in the first solvation shell of the hydronium) are quite strong compared to those of bulk water.


[edit] Solid hydronium salts
For many strong acids, it is possible to form crystals of their hydronium salt that are relatively stable. Sometimes these salts are called acid monohydrates. As a rule, any acid with an ionization constant of 109 or higher may do this. Acids whose ionization constant is below 109 generally cannot form stable H3O+ salts. For example, hydrochloric acid has an ionization constant of 107, and mixtures with water at all proportions are liquid at room temperature. However, perchloric acid has an ionization constant of 1010, and if liquid anhydrous perchloric acid and water are combined in a 1:1 molar ratio, solid hydronium perchlorate forms.

The hydronium ion also forms stable compounds with the carborane superacid H(CB11H(CH3)5Br6) [9]. X-ray crystallography shows a C3v symmetry for the hydronium ion with each proton interacting with a bromine atom each from three carborane anions 320 pm apart on average. The [H3O][H(CB11HCl11)] salt is also soluble in benzene. In crystals grown from a benzene solution the solvent co-crystallizes and a H3O.(benzene)3 cation is completely separated from the anion. In the cation three benzene molecules surround hydronium forming pi-cation interactions with the hydrogen atoms. The closest (nonbonding) approach of the anion at chlorine to the cation at oxygen is 348 pm
hydronium /hy·dro·ni·um/ (hi-dro´ne-um) the hydrated proton H3O+; it is the form in which the proton (hydrogen ion, H+) exists in aqueous solution, a combination of H+ and H2O.
It is theorotical. Read article "Theoretical confirmation of the stability of the H3O radical." by Authors:, Gangi, R. A.; Bader, R. F. W.. Publication:, Chemical Physics Letters, Volume 11, ...

Hydronium is the cation that forms from water in the presence of hydrogen ions. These hydrons do not exist in a free state: they are extremely reactive and are solvated by water. An acid is generally the source of these hydrons; however, since water can behave as an acid, hydronium exists even in pure water. This special case of water reacting with water to produce hydronium (and hydroxide) ions is commonly known as the self-ionization of water. The resulting hydronium ions are few and short-lived. (Nevertheless, they form the basis for determining the pH of basic aqueous solutions, since the less there are of these autoionized hydroniums, the more there is base.)
H3O is known as heavy water (deuterium protium oxide), its made from hydrogen isotopes and an oxygen molecule. Its physical properties are similar to that of normal water and it is believed that it also occures natrually (for every one molecule there are 41,000,000 normal water molecules). with respect to its effects on living things not much is known as it is rarely found because of its small concentrations and even less likely found as it is less dense than normal water so it will sink. artificially it has been formed as a product from using water to cool nuclear reactors (the cores) where hydrogen isotopes would be present.
Studies have conculded that it has detrimental effects from use by humans.
Hydronium.

It seems really unstable and is an ion.


I think you con make it with Hydroxyl atoms and Hydrogen molecules.

The answers post by the user, for information only, FunQA.com does not guarantee the right.



More Questions and Answers:
  • Measuring the alcohol concentration of pre-made wine?
  • Can boiling of water containing vinegar, kill bacteria ?
  • Silver tarnishes and turns black/black--do you think it is a physical change or a chemical change?
  • Besides H2O, are there any other naturally occuring chemicals/compounds that people can just drink down?
  • Which of the following represents .0000307 in scientific notation?
  • Absorbance data for phenycyanide by spectrophotometer?
  • There are presently 118 elements listed. Is there a limit on how many there can be?
  • Isotopes of calcium?
  • Chemistry Molarity Help regarding mixtures?