Engineering Questions and Answers

  • What is a rectifier's purpose in elctronic circuits?
  • What is a semi oxide metal conductor?
  • What is a surface mounted resistor?
  • What is a tap changer? What does it mean if tap position is set to zero?
  • What is a transistor? use circult diagram as an aid to distinguish between npn and pnp transistors?
  • What is a water tower for?
  • What is AIR COMPRESSION?
  • What is an electronic engineer expected to know if he is inducted as a fresher ?
  • What is an important advantage of an electron microscope?
  • What is an industrial hygienist definition of "clearance"?
  • What is an MM?
  • What is an optoelectronic device????
  • What is application of engineering statistic to computer engineering?
  • What is as/400? give abrief description?
  • What is atomic level difference in conduction of ac & dc?
  • What is 'aviation maintenance'?
  • What is AVR microcontroller?
  • What is benefit of Wet Bulb Temperature?
  • What is benox steel & its metallurgical composition? what is it used for?
  • What is better between it engineering or computer engineering?why?
  • What is better gas dyers or electric dyers?
  • What is better? i.t or electronics engineering?
  • What is biophysics?
  • What is blending header?
  • What is boiler automation; turbine automation?
  • What is Boost?
  • What is bpp (bits per pixel)? What is the exact definition?
  • What is building defects??
  • What is c.t (current transformer)ratio.how to calculate.?
  • What is C17201?
  • What is CDM in constrution?
  • What is CMRI in metering?
  • What is cold bend?
  • What is common between communication and electronics engineer?
  • What is Computer Engineering ?
  • What is constructed wetland? is it effective enough for water/wastewater treatment? thx in advance?
  • What is contour in civil engineering?
  • What is conversion of kilo newton in kg/cm2?
  • What is copper used most for?
  • What is core construction versus shell construction?
  • What is definition of "dynamic diameter" .?
  • What is definition of "dynamic diameter"?
  • What is definition of an industrial building system and it's implementation?
  • What is difference between "master of engineering=MEng" and master of applied science? MASc?
  • What is difference between 1" and 5" total station survey instrumnet...?
  • What is difference between 1" and 5" total station survey instrumnet...?
  • What is difference between aerospace and aeronautical engineering?
  • What is difference in syllabus of FY BE/BTECH of electronics-communication & electronics-telecommunicaton?
  • What is double insulated kite code?
  • What is Drive and how it works?, What is AC & DC drive? What is the difference and benifit of on the other?
  • What is DX coding?
  • What is electrical current?
  • What is ELECTRICAL ENGINEERING?
  • What is environmental eng.?what r the best eng. colleges 4 environmental eng.?
  • What is environmental flow?
  • What is faster lightness or darkness?
  • What is fire blast?
  • What is fire hydrant in industries and how it works?
  • What is formation of channel with the threshold voltage bias voltage for Mos terminal?
  • What is ft^3, it is a form of gas measurement?
  • What is full form of GLS and MLL lamp?
  • What is function of function?
  • What is Fuzzy logic and how does it help washing machines?
  • What is genetic engineering?
  • What is Grr stand for?Is that General Repeatibility and Reproducibility?
  • What is high aspect ratio drilling?
  • What is high aspect ratio in drilling the slot in micro edm?
  • What is HT & LT electrical distribution system.?
  • What is hydro treating process?
  • What is i.c chips stands for?
  • What is INDUSTRIAL ENGINEERING?(India)?
  • What is inside a compressor out of an Ice machine?
  • What is instrument calibration??
  • What is intrinsic safety?
  • What is IT engineering n how is it different from computer engineering?
  • What is Keralite Tape?Where to get from?
  • What is kinamatics? how to calculate projetile of inclined plane? and relative velocity problems?
  • What is lifter or Ionocraft ?
  • What is logic circuit?
  • What is MATLAB...??
  • What is mean by MEP?
  • What is meaning of depth of cut in highway engineering?
  • What is meaning of electronics?
  • What is meant by "nominal atmospheric pressure"?
  • What is meant by 120 phase difference?
  • What is meant by degaussing?
  • What is meant by elastic & inelastic collision?
  • What is meant by FACTS in Electrical engineering ?
  • What is meant by 'full load dc motor current'?
  • What is meant by Q.S. in electrical field, and explain about duties &responsibilities of QS?
  • What is meant by RFQ design??
  • What is meant by shaft and commutator in the armature?
  • What is meant by the term 'finish grade elevation'.?
  • What is meant by UKBU in engineering or construction project development?
  • What is Mechanical Engineering Technology?
  • What is mist lubrication?
  • What is molecular oscillation technology?
  • What is movement detector and how to design it?
  • What is nova?
  • What is nuclear engineering?
  • What is O S & Y Gate valve and how is it different from a normal Gate valve?
  • What is ohms law? can u explain it in simple terms?
  • What is optical sensors?
  • What is packing code of HDPE barrels?
  • What is palaeontoligist and what tools are used?
  • What is Pieaso electric effect?
  • What is pitch, yaw, and bow in aerodynamics?
  • What is PLC ? And How It works?
  • What is power factor?
  • What is Power Plant Automation?
  • What is primary for a motor selection voltage,power,current or ?
  • What is protective lining in water tanks?
  • What is pulse stuffing or bit stuffing in time division multiplexing?
  • What is pulse stuffing or bit stuffing in time division multiplexing?
  • What is relative database management system?
  • What is resonant vibration?
  • What is scaling? (Pertaining to water systems)?
  • What is scope of chemical engineering in india....?
  • What is sensitivity?
  • What is six degrees of freedom?
  • What is small signal analysis in amplifier?
  • What is sobri63?
  • What is social engineering?
  • What is sonic anemometer and on what pricipal is it work ?
  • What is Standard Air Flow rate?
  • What is standardization and difference of Indian standardization and British?
  • What is star rates?
  • What is stick welding?
  • What is switch yard in power station?
  • What is systems engineering and how is it applied in any working environment?
  • What is technology?
  • What is television's material?
  • What is the 'A' Dimension of an AC electric motor?
  • What is the aberivation for the spice?
  • What is the absolute strongest metal..?
  • What is the admission procedure for the engineering colleges of noida?
  • What is the advantage of digital PID controller vs a analog PID?
  • What is the advantage of optical CT over conventional CT in preventing power theft?
  • What is the angle of repose of a falling bulk material?
  • What is the annual salary of a BITSian?
  • What is the answer for " portions of cones truncated by planes parllel to their bases"?
  • What is the application of science?
  • What is the arcitecture of 8051 microcontroller, and 8085 processor?
  • What is the average income of a automotive engineer?
  • What is the average kilowatt usage for a fargo household?
  • What is the average of a person's salary with an aa degree?
  • What is the average pay i England for Engineers and are salary high?
  • What is the average starting salary of an operations research analyst with a master's degree?
  • What is the average starting salary of an operations research analyst with a master's degree?
  • What is the average wavelength of light that is filtered in a camcorder?
  • What is the bandwidth of copper?
  • What is the base angle of materials that is flowing from above?
  • What is the basic principle of a Torque converter?
  • What is the best Biomedical Engineering or Electrical Engineering ?
  • What is the best book to learn construction/civil engineering spanish?
  • What is the best calculator for a civil engineer?
  • What is the best conducter of electricity?
  • What is the best current efficiency of silicon solar cells?
  • What is the best equipment for air duct cleaning?
  • What is the best heat transfer model for rocketry?
  • What is the best software solidworks or autodesk inventor for advance models and assembly?
  • What is the best state to live in for a career in engineering?
  • What is the best type of resistor? Why?
  • What is the best way to become a Sr. process control engineer?
  • What is the best way to illuminate a non-backlighted LCD?
  • What is the best way to keep your electricity active in your home in the event of a power outage?
  • What is the best way to mix carbon nanotubes in epoxy?
  • What is the best way to sum individual hatch areas, (auto cad)?
  • What is the blue beam project ?
  • What is the boundary to distinguish the limit of solid and liquid (i.e soil in solid and as a mud)?
  • What is the buffing and polishing procdure for stainles steel pipes?
  • What is the cause of discrepancy in the hardness of specimen that used for Rockwell hardness test ?
  • What is the cheapiest way to desalinate sea water?
  • What is the clear oil called inside Oil Pressure Gauges?
  • What is the coefficient of frictioin of... balsa wood against concrete?
  • What is the component of a hand drill?
  • What is the constraints of technical communications?
  • What is the correct operating pressures for R134a refrigerant in a window unit air conditioner?
  • What is the correct spelling of the word wailler/ sounds like whaler?
  • What is the cost o a(2"x12")board 12' long, if the cost per MBM is $460.00?
  • What is the cost of Electricity per UNIT in Mississauga, Ontario, Canada or Ontario, Canada.?
  • What is the criterion to classify dishes as microwaveable ones? What's the scientific reason behind this?
  • What is the cubic inch in value of the #12 copper wire is ?.?
  • What is the current on the circuit t=0+ ?
  • What is the deference between heavy duty diesel generator set and continuous diesel generator set and speeds?
  • What is the definition of absolute weight?
  • What is the definition of engineering (in general)?
  • What is the definition of glide definition?
  • What is the definition of nominal voltage?
  • What is the diference between ELR and ELCB. Can we use an ELR to a single phase supply?
  • What is the difference between "Hardware reliability" and "Software reliability"?
  • What is the difference between 277 volts and 120.?
  • What is the difference between a 4 stroke cycle engine and a 2 stroke cycle engine?
  • What is the difference between a bs and a ce number?
  • What is the difference between a closed loop and an open loop circuit in hydraulics?
  • What is the difference between a decoder and demultiplexer?
  • What is the difference between a levee and a dyke?
  • What is the difference between a pressure transmitter and a pressure transducer?
  • What is the difference between aircraft maintence engineering and aeronautical engineering?
  • What is the difference between an AK-47 and a AK-74 automatic riffle?


  • Page [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104] [105] [106] [107]