Engineering Questions and Answers

  • What is the best job for a chemistry major?
  • What is the best kit (like mind strom from lego) to start robotics.?
  • What is the best material to use for a blade on a turbojet engine?
  • What is the best review source for the FE/EIT exam?
  • What is the best substance to us out of home made rocket engines?
  • What is the best thermal dissapation wood on the market?
  • What is the best thesis proposasl for electronics and communication engineering students?
  • What is the best type of mechanical movement watch?
  • What is The best using c++ or turbo pascal?
  • What is the best way to cut cast iron?
  • What is the best way to get inot the welding field?
  • What is the best way to get rid of beer breath?
  • What is the best way to invent something? Like and industrial piece of machinery.?
  • What is the best web site for civil engineers?
  • What is the biggest man made structure on earth?
  • What is the biggest manmade structure in the philippines?
  • What is the biggest power station (power plant for those in the US) in the world?
  • What is the category of lovely professional institute,jalandhar,punjab?
  • What is the CE color requirement for a "laser on" indicator lamp?
  • What is the center measurement of the travel between two 1" 1/2 unthreaded 45 degree L's with an offset of 4ft
  • What is the cheapest way to clean the gas stream with H2S between 500-1000 ppm ?
  • What is the close running fit for a 2.250" cylinder?
  • What is the coefficient of friction of ABS plastic?
  • What is the composition of the copper sulphate mixture used when marking out on metals?
  • What is the compressive strength of hardwood?
  • What is the compressors classification?
  • What is the construction ,operations and practical applications of scr?
  • What is the conversion factor for kg.m to N.m?
  • What is the conversion from square yards to tons?
  • What is the conversion of joles to liters?
  • What is the correct definition of fabrication?
  • What is the cost of 100 m.t. Capacity of Multipurpose Cold Storage.?
  • What is the Cost of Professional Liability Insurance for Structural Engineers?
  • What is the cut off marks for getting into aerospace engineering through SRMEEE?
  • What is the diameter of an octagon that is 1 1/16 inch across the flats: as to use a 1 1/16 wrench to losen it
  • What is the dictionary definition for genetic engineering?
  • What is the diff between CIVIL AND ARCHITECTURE ENGINEERING.?
  • What is the diff btwn BE and Btech pl give details?
  • What is the differance Between a cantilever bridge and a suspension bridge?
  • What is the differance between an air cylinder and a hydraulic cylinder?
  • What is the differance between single and double acting air cylanders?
  • What is the differecne between engineering and design?
  • What is the difference b/w electronics engineering and electrical eng. in the vtu syllabus?
  • What is the difference B\W C.S & IT?
  • What is the difference betn B-Tech & Bio-Tech?
  • What is the difference between "Canal" and "Channel"?
  • What is the difference between a 2-way valve and a 3-way valve. (ans in not more thn 3 sentence)?
  • What is the difference between a 74AC241 and a 74AC244?
  • What is the difference between a capacitor and a condenser?
  • What is the difference between a designer and an engineer?
  • What is the difference between a dmarc and mpoe?
  • What is the difference between a force scale and a weight scale?
  • What is the difference between a helix angle and a lead angle on a helical gear?
  • What is the difference between a hydrogen bomb and an atomic bomb?
  • What is the difference between a maintenance engineer and a reliability engineer?
  • What is the difference between a section and a detail on design plans?
  • What is the difference between a signal & a power circuit?
  • What is the difference between aeronautical engineering and aircraft maintenance engineering?
  • What is the difference between ball valve and flow control valve.?
  • What is the difference between Bioengineering and Biotechnology?
  • What is the difference between Bulk Density & Specific Gravity in Polymers?
  • What is the difference between change parts and spare parts?
  • What is the difference between cluster computing and grid computing?
  • What is the difference between computer science and information science engineering in india?
  • What is the difference between computer science and information technology?
  • What is the difference between directional drilling and Jack and boring?
  • What is the difference between divergent and convergent boundaries?
  • What is the difference between DMC pile & Under reamed pile?
  • What is the difference between elastic and plastic deformations? Give 2?
  • What is the difference between HRC & CRC sheets and what are the advantages and disadvantages of the same?
  • What is the difference between information tedhnology and computer science?
  • What is the difference between ISO and ANSI style in CAD?
  • What is the difference between isolator and switch?
  • What is the difference between low NOx natural gas and normal natural gas?
  • What is the difference between moments of inertia and products of?
  • What is the difference between neutral, common, and ground (in terms of electricial applications)?
  • What is the difference between piston and plunger?
  • What is the difference between PLC and TREND used in HVAC controls?
  • What is the difference between Product Engineer & Process Engineer?
  • What is the difference between proximity switch and limit switch?
  • What is the difference between self priming & non self priming Centrifugal pumps?
  • What is the difference between silica sand performance in paints and Calcium Carbonate?
  • What is the difference between siphon jet and blowout fixtures?
  • What is the difference between stairwells and staircases?
  • What is the difference between steel joists and joist girders?
  • What is the difference between the corosion resistance of 316 Stainless Steel T-rod versus 304 Stainless TRod?
  • What is the difference between torque of the car and its orse power?
  • What is the difference between types I, II and III anodized aluminum?
  • What is the difference between windmill blade types?
  • What is the Difference in 226K and 226 Ohms?
  • What is the difference in meaning between "Train" & Stream" in process flow?
  • What is the difference in the detergents for top and front loading washing machines?
  • What is the different betbeen prototype and non proto type.?
  • What is the different between PLC and PIC?
  • What is the diffrence between earthing,neutral and grounding?
  • What is the diffrence between pin type, suspension type and strain type insulator?
  • What is the digital signals?
  • What is the easiest way to hook up solar power to your house?
  • What is the effect of temperature and Pressure on Absorption?
  • What is the effect of Wn (NMOS) on oscillation frequency of differential logic ring oscillator?
  • What is the effect on power factor when a motor starter is replaced with viriable speed drive(at same speed)?
  • What is the efficiency of a DC generator that requiers 200 watt of energy to supply 160 watts of output power?
  • What is the eligibility criteria and the colleges for automobile engineering?
  • What is the energy consumed by auto's in U.S., per year?
  • What is the equation for calculating the gradient of a slope?
  • What is the equation for calculating ZULU time?
  • What is the etchant solution for etching martensite of Ti-6Al-4V?(PRECISELY)?
  • What is the exact function of a rubber duck?
  • What is the expansion of "PREN"?
  • What is the expansion rate of helium versus altitude?
  • What is the expected cut-off marks for the selection of tamilnadu counseling,aieee,iit-jee.please reply with u
  • What is the failure mode of a Xenon flashlamp?
  • What is the fastest speed achieved by man on land?
  • What is the force to lift up a load of 150kg which is offest from centre about 75cm?
  • What is the formula for calculating the resistance needed to produce a known voltage drop on a dc circuit?
  • What is the formula for calculating the resistance needed to produce a known voltage drop on a dc circuit?
  • What is the formula for finding how fast water is moving through a pipe?
  • What is the formula for the coefficient of linear expansion of metal?
  • What is the formula to compute attrition rate?
  • What is the formula to determine tare torque values when torquing nuts from the bolt head?
  • What is the function of 1. laod loop drop and 2. synchronizing droop in power generators?
  • What is the function of a capacitor in an A.C.?
  • What is the function of DFA and NFA in building high level compilers?
  • What is the function of PLC?
  • What is the function of the wireless spectrum?
  • What is the function of vortex finder in cement cyclone?.?
  • What is the future of Indian crane/Hoist industry in coming days?
  • What is the GPA required to get in the Aerospace Engineering program at U of Toronto, Carleton or Ryerson?
  • What is the hardest materials in the world after diamond?
  • What is the height that a meter socket is required to be?
  • What is the highest paying type of engineering in canada for a young engineer?
  • What is the highest wind that the empire state building can endure?
  • What is the importance of chemistry in engineering???
  • What is the Indian standard for water requirement per day per person.What is global standerd?
  • What is the job function of clerks of work, in construction field?
  • What is the job of an architect in the construction field ?
  • What is the L/D ratio in the injection molding machinery?
  • What is the latest on journal articles concerning the absorption of zinc vapours on bubbles of lead?
  • What is the latest technology ever invented or had been created?
  • What is the lattice energy of RbCl?
  • What is the law about copper gas pipes in screed?
  • What is the lifespan of a chiller and how should the chiller maintenance be done?
  • What is the likely effect of R22 leaking into the boiler?
  • What is the main use of tranformer in a circuit ?
  • What is the mathmatical formula for building stairs, rise and run?
  • What is the maximum amount of weight that modern machinery can move?
  • What is the maximum incline for a 4X4 trail ?
  • What is the maximum theoretical temperature a heat pipe in an evacuated tube could reach?
  • What is the meaning of 1TR?
  • What is the meaning of 'Back Wash Water' in a water treatment Process Plant ?
  • What is the meaning of modular versus integrated design strategy?
  • What is the meaning of MTBF in industrial products?
  • What is the meaning of pre mechanical age?
  • What is the meaning of ton in AC specification?
  • What is the meaning or purpose of information technology and scope in engineering field?
  • What is the measurement unit for magnets?
  • What is the medical criteria for aeronautical engineering?
  • What is the method to make windsreen washer liquid?
  • What is the metric conversion result for 200 micro meters thickness?
  • What is the minimum temp that can be attained in 0.75 ton window AC?
  • What is the minimum vertical(tilt) angle for the plane to take off?& does it varies with the design?
  • What is the molecular formula for copper nitrite?
  • What is the most beautiful building in the world?
  • What is the most bouyant material known to man?
  • What is the most cheap way I can build a Faraday cage?
  • What is the most efficient use of sheet metal in ductwork construction?
  • What is the most expensive privately-funded construction project of all time?
  • What is the most expensive raw material among the components used to manufacture cement.and how much is it ?
  • What is the most sought after branch in engineering??
  • What is the name and location of the world's tallest building?
  • What is the name of balls on power electrical lines??
  • What is the name of the cement used to build bridges?
  • What is the nanotechnology?
  • What is the need for paired frequencies in FDD?
  • What is the opposing views to the church on GENETIC ENGINEERING?
  • What is the OSHA standard for walking and working surfaces?
  • What is the Phobia of Wind Turbines/Windmills called?
  • What is the PIV of a Bridge Rectifier?
  • What is the position of AUTHORIZED PERSON at QA dept in pharmacetical industry.Necessary to be the HEAD of QA?
  • What is the power law of eddies dissipation?
  • What is the power ratio for dB=40?
  • What is the pressure loss at 25mm dia fire hose nozzle?
  • What is the price of a porcelain "bell" insulator (ANSI Class: 52-1,2,3)??
  • What is the problem with nuclear energy? Why do we have an energy crisis threat with so much nuclear energy?
  • What is the process description of rotary kiln gasification - oxidation process?
  • What is the process for making bar stock that has a hole through the middle?
  • What is the proper name of the cast concrete blocks that are approximately 2'x2'x6'?
  • What is the pump similarity?
  • What is the purpose of a resistor in a red light circuit on the underground?
  • What is the purpose of a trainstop in a red light circuit on the underground?
  • What is the purpose of alarm signal?
  • What is the purpose of as fuse in a red light circuit on the underground?
  • What is the purpose of the air vavle near the handle of a vaccum cleaner ?
  • What is the purpose of the large nitrogen tanks seen by public utilities equipment?
  • What is the purpose of the steel arch on the new wembely stadium. Is it purely for the athsetics of the place?
  • What is the purpose of watertowers?
  • What is the rain water purification methords?
  • What is the ramp thingy on a screw?
  • What is the range of the refrigerant side working pressure for R-22?
  • What is the ratio of cement, sand,crushed stone in concrete.?


  • Page [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104] [105] [106] [107]